FURY Beast - DDR3 - Kit - 8 GB

Kingston Technology KF318C10BBK2/8. Component for: PC/server, Internal memory: 8 GB, Memory layout (modules x size): 2 x 4 GB, Internal memory type: DDR3, Memory clock speed: 1866 MHz, Memory form factor: 240-pin DIMM, CAS latency : 10

https://www.kingston.com/germany/en/memory/search?partId=KF318C10BBK2%2F8

FURY KF318C10BBK2/8 is a kit of two 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 240-pin DIMM uses gold contact fingers.

• JEDEC standard 1.5V Power Supply
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ┬▒ 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85┬░C 3.9us at 85┬░C < TCASE < 95┬░C
• Asynchronous Reset
• Height 1.338ΓÇ¥ (34mm) w/heatsink
• VDDQ = 1.5V
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address ΓÇ£000ΓÇ¥ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe