FURY Beast - DDR3 - Kit - 16 GB
240-Pin - 1,600 MHz - non-ECC - DIMM - CL10 - 16 GB: 2 x 8 GB - DIMM 240-PIN - 1600 MHz / PC3-12800 - CL10 - 1.5 V - unbuffered - non-ECC - black
Brand: Kingston
SKU: KF316C10BBK2/16
$0.00
Price as listed. Shipping charges calculated at checkout.
Out of stock
Do you have any question about this product or its specs? Want to know more? Click here to contact our pre-sales consultant and make the right purchase.
NOTE: The information below is provided for your convenience only; the accuracy of the specifications cannot be guaranteed. However, if necessary, please check with us before purchasing. Data provided by 1 World Sync.
General
Component for
PC/server
Internal memory
16 GB
Memory layout (modules x size)
2 x 8 GB
Internal memory type
DDR3
Memory clock speed
1600 MHz
Memory form factor
240-pin DIMM
CAS latency
10
Kingston Technology KF316C10BBK2/16. Component for: PC/server, Internal memory: 16 GB, Memory layout (modules x size): 2 x 8 GB, Internal memory type: DDR3, Memory clock speed: 1600 MHz, Memory form factor: 240-pin DIMM, CAS latency: 10
| Estimate Gross Weight | 0.096 |
|---|
https://www.kingston.com/germany/en/memory/search?partId=KF316C10BBK2%2F16
FURY KF316C10BBK2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 240-pin DIMM uses gold contact fingers.
FURY KF316C10BBK2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 240-pin DIMM uses gold contact fingers.
- JEDEC standard 1.5V Power Supply
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ┬▒ 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85┬░C 3.9us at 85┬░C < TCASE < 95┬░C
- Asynchronous Reset
- Height 1.338ΓÇ¥ (34mm) w/heatsink
- VDDQ = 1.5V
- 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address ΓÇ£000ΓÇ¥ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
0.0
0 review(s)
Inside NetworkDistri
From our network to yours.
Every day, technology moves through our operation — received, checked, prepared and dispatched to customers. The images below show real equipment handled through our operation, not stock photography.
Real operations
Technology we actually handle
01
Source
Global supply
02
Receive
Goods arrive
03
Prepare
Process & pack
04
Dispatch
On the way
